Land Pride

Table of Contents

 

 

Section 2: Assembly & Set-Up (Optional)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Small Seeds Box (S/N 397503+)

3. Align the four box spacers (#2) to the inner holes of the

 

 

Small Seeder Box assembly

 

Small Seeds Box and the main box and assemble the

 

 

 

four longer 5/16” bolts (#4), flat washers (#7), lock

 

 

1. Remove the eight bolts, lock washers and nuts that

washers (#6) and nuts (#5).

 

 

are assembled in the front of the main box. Retain two

4. Refer to Figure 1-4. Attach rubber seed tubes to

 

 

bolts, lock washers and nuts and use these to plug the

 

 

feeder cups with clamps provided and then into the

 

 

two holes in the front of the Small Seeds Box.

 

 

small holes in seed drop without clamps. Push rubber

 

 

 

 

 

 

Refer to Figure 1-6:

 

hoses into the seed drop hole to remove any excess

 

 

2. Assemble the Small Seeds Box (#1) at the ends with

slack.

 

 

the four 5/16” bolts (#3), flat washers (#7), lock

 

 

 

washers (#6) and nuts (#5). Do not tighten until

 

 

 

spacers (step 3) are installed.

 

 

 

Plug 2 Holes

Small Seeds Box Assembly

20587

Figure 1-3

 

Rubber seed hoses

clamped to feeder cups

Insert rubber hoses into seed drop holes

20596

Small Seeds Tube Assembly

Figure 1-4

4/03/08

PS2096 Series Primary Seeders 313-308M

9

Page 11
Image 11
Land Pride 313-308M manual Small Seeds Box S/N 397503+, Small Seeder Box assembly