Table of Contents

Section 2: Assembly & Set-Up (Optional)

Land Pride

Small Seeds Drive Assembly

Refer to Figure 1-8:

1.Place decal “Danger Guard Missing” (#17), “Danger Moving Parts” (#18) and “Seed Rate Chart” (#19) in locations shown (beneath lid).

2.Assemble chain guard mounts (#5) with the 1/4” flange bolts (#7) and flange nuts (#10). Do not tighten until the complete drive has been assembled and the chain guard (#15) installs properly. The chain guard mounts are slotted for easier chain guard mounting.

3.Install chain idler with welded on spacer (#2) and chain idler (#3) with 1/2” nut (#8).

4.Assemble the spacer (#4) and reduction sprocket assembly (#6) to the 5/8” welded on bolt with the 5/8” lockwasher (#11) and nut (#9).

5.Assemble the front roller sprocket (#12) and key (#1) to the front roller shaft.

6.Install chain (#14) first and then chain (#13).

7.Assemble chain guard (#15) with knobs (#16). Position chain guard mounts (#5) where needed and tighten hardware.

Small Seeds Drive Assembly

Figure 1-8

20608

12 PS2096 Series Primary Seeders 313-308M

4/03/08

Page 14
Image 14
Land Pride manual 12 PS2096 Series Primary Seeders 313-308M