Table of Contents
Section 2: Assembly &
Land Pride
Small Seeds Drive Assembly
Refer to Figure 1-8:
1.Place decal “Danger Guard Missing” (#18), “Danger Moving Parts” (#19) and “Seed Rate Chart” (#20) in locations shown.
2.Assemble chain guard mounts (#5) with the 1/4” flange bolts (#8) and flange nuts (#11). Do not tighten until the complete drive has been assembled and the chain guard (#16) installs properly. The chain guard mounts are slotted for easier chain guard mounting.
3.Install chain idler with welded on spacer (#2) and chain idler (#3) with 1/2” nut (#9).
4.Assemble the spacer (#4) and speed change sprocket assembly (#7) to the 5/8” welded on bolt with the 5/8” lock washer (#12) and nut (#10).
5.Assemble the front roller sprocket (#13) and key (#1) to the front roller shaft.
6.Install chain (#14) first and then chain (#15). Tighten chains with idlers (#2) and (#3).
7.Assemble chain guard (#16). Position chain guard mounts (#5) where needed and tighten hardware.
Small Seeds Drive Assembly |
|
Figure | 20588 |
|
10 PS2096 Series Primary Seeders | 4/03/08 |
