CVT And Cover Kit
Assembly Instructions
| Treker 4210/4410 ST Series |
| Manual No. | ||
|
|
|
|
|
|
| Before You Start |
| Further Assistance | ||
|
|
|
|
|
|
|
|
|
|
|
|
When you see this symbol, the subsequent
!instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it!
IMPORTANT: Before you begin, read these instructions and check to be sure all parts and tools are accounted for. Please retain these installation instructions for future reference and parts ordering information.
Your CVT And Cover Kit is exclusively designed for your Land Pride 4210ST & 4410ST Trekers. Please read these installation instructions and your vehicle Operator’s Manual thoroughly before beginning. Especially read information relating to safety concerns. Also included in the Operator’s Manual is important information on operation, adjustment, troubleshooting, and maintenance for this kit (some manual sections do not apply to all accessories).
A separate Parts Manual for replacement parts can be purchased from your dealer or available free of charge at www.landpride.com. Have model and serial numbers handy when placing an order.
Manual Part Numbers:
•Operator’s Manual . . . . . . . . . . . . . . . .
•Parts Manual . . . . . . . . . . . . . . . . . . . . .
General Information
These assembly instructions apply to the following CVT And Cover Kit Accessories listed below:
700-519A TREKER CVT/COVER KIT
Tools required:
•Safety glasses
•Work gloves
•Center punch
•Hammer
•Electric drill with 1/8" drill bit
•Extension cord (if required)
•Phillips screwdriver
•3/16" hex socket wrench
•11/32" box end or open end wrench
•7/16" box end or open end wrench
•Two 1/2" box end or open end wrenches
•9/16" box end or open end wrench
•3/8" or 1/2" ratchet wrench with 3" extension and 3/4" socket
•Pop Rivet Gun
•
Your dealer wants you to be satisfied with your new CVT And Cover Kit. If for any reason you do not understand any part of this manual or are not satisfied with the service received, the following actions are suggested:
1.Discuss the matter with your dealership service manager making sure he is aware of any problems you may have and that he has had the opportunity to assist you.
2.If you are still not satisfied, seek out the owner or general manager of the dealership, explain the problem and request assistance.
3.For further assistance write to:
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks.
lpservicedept@landpride.com
Assembly Instructions
A detailed listing of parts for this accessory kit is provided on page 6. Use the list as a checklist to inventory parts received. Please contact your local Land Pride dealer for any missing hardware.
Initial Preparations
The steps listed below must be followed before installing this kit:
!CAUTION
Securely support cargo box in the up position to prevent injury when working under the cargo box.
1.Park vehicle on a level surface. Don’t work under or around a vehicle parked on an incline.
2.Move gear shift lever to park, and chock front and back of any wheel to prevent vehicle from rolling.
3.Raise cargo box fully up and securely support it in the up position to prevent injury while working around the engine.
4.Turn ignition switch off and remove switch key.
© Copyright 2007 | Pr inted | 3/20/07 | 1 |
