Land Pride 4400ex manual Pre-Delivery Certificate, Vehicle Information, Dealer Test Ride List

Table of Contents

Section 3: Pre-Delivery and Check List

Each vehicle must undergo a Pre-Delivery Inspection by the Dealer. Listed below is an example of the checklist that is included with the Warranty Registration that is to be submitted to Land Pride upon Retail Sale. The Pre-Delivery Certificate and Warranty Registration must be submitted to Land Pride in order to activate the vehicle warranty.

Pre-Delivery Certificate

The dealer is required to complete Land Pride’s “Certificate of Heavy Duty Utility Vehicle Pre-Delivery” form before customer may take possession of the vehicle. The information must be filled in and check list checked off or initialed by individuals performing the checks. Dealership’s name, signatures of individuals filling in the form, seller’s signature, customer’s signature and signing dates are also required before the form is returned to Land Pride. Below is a list of the information found in the form that is required to be completed and checked off.

Vehicle Information

Model No.	_________________
Date	_________________
Serial No.	_________________
Engine Serial No.	_________________

Dealer Service and Inspection List

___Fully charge battery. Check battery voltage to verify that it is fully charged.

___Check tire pressure to make sure front tires have 15 psi and rear tires have 20 psi.

___Make sure wheel lug bolts/nuts are tightened to 90 Newton meters/(65ft. lbs.).

___Check master cylinder to make sure it is filled.

___Check engine oil level at the dipstick. Add SAE 10W30 oil if oil is below the full mark on the dipstick.

___Check engine for correct RPM. Set to factory specification if needed. (See page 40)

___Check steering cylinder for tightness.

___Check choke control. It should move and return freely.

___Step on foot brake to make sure there is plenty of pedal and that brakes hold pressure and do not bleed off. Add brake fluid and bleed brakes if required.

___Make sure seats and seat belts are properly fastened to the frame if so equipped.

___Make sure all safety decals are in place.

___Check headlights to make sure they are working and are properly mounted.

___Inspect air cleaner element. Make certain it is clean and in place.

___Inspect the fuel tank to make sure it is properly installed and that there are no leaks.

___Check fuel level to make sure there is at least 1/8 of a tank of gas prior to performing initial starting operations.

___Inspect fuel lines to make sure they are properly installed and that there are no leaks.

___Check steering by executing a full lock to lock turn in each direction.

___Check park brake to make sure it will engage, hold and release.

___Make sure neutral start feature is working by depressing the clutch to start the unit.

___Check throttle control to make sure it moves and returns freely.

___Check differential oil level at the differential oil plug. Add 80/90 gear lube if oil is below oil plug outlet.

___Check overall appearance for cleanliness and for body and molding damage.

Dealer Test Ride List

___Check engine for starting, accelerating, running and idling smoothly.

___Check steering response. There should be no free- play.

___Check forward, neutral and reverse shifting response. Also check neutral start response by depressing the clutch to start the vehicle.

___Check park brake to make sure it engages, holds and disengages.

___Make sure rocker switches are all working.

___Make sure throttle is responsive and returns freely.

___Make sure suspension ride is satisfactory and stable.

___Make sure there are no fuel or petroleum leaks.

___Make sure the foot brake has a firm engagement and that stopping is straight.

___Make sure there are no bad rattles or vibrations.

12 4400EX Heavy Duty Off Road Utility Vehicle 720-051M 6/30/05