Table of Contents
Section 7: Lubrication and Fluids
Pillow Block Bearing
Refer to Figure
100 hrs
The Pillow block bearing is located along side the left side of the engine below the fuel filter.
•Grease every 100 hours of operation
•Type of Grease: Multipurpose
•Quantity: 3 or 4 pumps of the grease gun.
Stop adding grease if lubricant emerges through the seals.
21352
Figure
Rotating Bearing Surfaces
Refer to Figure 7-14 and Figure 7-15
Daily
The swivel tube is located in the rear frame (See Figure
The shift selector vertical pivot is located along the left side of the transmission (See Figure
•Grease daily before putting into service
•Type of Grease: Multipurpose
•Quantity: Grease until lubricant emerges from one end of the bushing.
21356
Figure
21357
Figure
36 | 4400EX Heavy Duty Off Road Utility Vehicle | 6/30/05 |