Land Pride 4400ex Spark Arrester Maintenance Schedule, Spark Arrester Maintenance Procedure

Table of Contents

Section 6: Maintenance

carefully to prevent damaging it. Inspect and replace the element if it is dirty, bent or damaged with a genuine Land Pride element. Do not use an element if its sealing surfaces are bent or damaged.

7.Check air cleaner base. Make sure it is not bent or damaged and is secured.

8.Check element cover. Make sure it is not bent or damage and that it fits properly. Replace all damaged air cleaner components.

9.Inspect the air cleaner base for loose dirt or debris that may have fallen on it when the element was removed. Be careful that none of the dirt drops into the intake throat, remove base and wipe it clean.

10.Check the condition of the rubber seal on the air cleaner stud, replace it if its condition is questionable in any way. A new rubber seal is provided with the replacement paper element in a sealed packaged.

11.Reinstall paper element, precleaner, element cover, element cover nut, and air cleaner cover. Secure cover with cover retaining knob.

Order genuine Land Pride parts when replacing the paper element.

Spark Arrester Maintenance Schedule

•Inspect every 100 hours for carbon build-up and screen damage.

•Clean whenever carbon build-up is visible or whenever lost of engine power is detected.

•Replace when damaged.

Spark Arrester Maintenance Procedure

Refer to Figure 6-10

1.Remove spark arrester mounting screws, exhaust deflector and spark arrester from the muffler.

2.Remove carbon deposits from spark arrester screen with a wire bristle brush. Be careful not to damage the spark arrester screen.

3.Inspect the spark arrester for holes or breaks in the screen and replace if damaged.

4.Reattach spark arrester and exhaust deflector to muffler with mounting screws.

Description Part No.

Paper Element (65 mm deep) . . . . . . . . 47-083-03-S

Spark Arrester

!DANGER

The spark arrester does not stop all fire emitting sparks from escaping the muffler. Use extreme caution when driving through dry grass, brush and other fire hazard materials. Never stop or park the vehicle over combustible materials.

!WARNING

The muffler is very hot and will burn upon contact. Allow time to cool before servicing the spark arrester.

!CAUTION

To maintain efficiency, the spark arrester must be serviced every

100hours.

!CAUTION

Be careful not to damage the spark arrester screen when cleaning.

Refer to Figure 6-10

The spark arrester is mounted inside the muffler behind the muffler exhaust deflector. It is designed to suppress sparks from escaping the muffler while they are still glowing.

Muffler

Spark

Arrester

Exhaust

Deflector

Mounting

Screws

21349

Figure 6-10

Replacement Parts

Description Part No.

Spark Arrester . . . . . . . . . . . . . . . . . . . . . . 840-174C

6/30/05 4400EX Heavy Duty Off Road Utility Vehicle 720-051M 29