Land Pride | Table of Contents |
Section 5: Maintenance and Lubrication
Lubrication Points |
|
|
|
|
|
Lubrication | 50 | Intervals in hours | |||
Legend | spray lube | grease lube | oil lube | is required | |
|
| at which lubrication | |||
|
|
|
|
| 8 |
|
|
|
|
| Hours |
|
| Driveline Constant Velocity Shaft | |||
|
| Type of Lubrication: | |||
|
| Quantity = See drawing |
|
| |
|
| IMPORTANT: To extend the life of the constant velocity | |||
|
| joint, extensive lubrication must be performed every 8 | |||
12726 |
| hours of operation! |
|
| |
|
| k. | The constant velocity joint should be greased in a | ||
|
|
| straight position forcing grease through the | ||
|
|
| passages and into the cavity. After lubrication, | ||
|
|
| grease should be visible around the ball joints. | ||
|
| l. | The constant velocity driveline comes equipped with | ||
|
|
| a grease zerk in the outer telescoping member and | ||
|
|
| must be greased every 8 hours to prevent premature | ||
|
|
| failure of the joint. |
|
|
|
| m. Grease fittings are located on the | |||
|
|
| driveline shields and should be lubricated every 8 | ||
|
|
| hours of operation. |
|
|
12725 |
25
Hours
Driveline Shafts
Model 4011
Type of Lubrication:
Quantity = See drawing
13667 |
25
Hours
Driveline Shafts
Models 4014 & 4016
Type of Lubrication:
Quantity = See drawing
7/28/06 | AFM4011, AFM4014 and AFM4016 All Flex Grooming Mowers |