Table of Contents
Section 5: Maintenance and Lubrication
Land Pride
V-Belt Installation
!CAUTION!
Belt drive system under spring tension; use care to avoid bodily harm!
Refer to Figure 4-8 & Figure 4-9:
These illustrations are also on the labels located on the top of the mower decks.
1.Remove the right hand and the left hand belt covers.
2.Disengage belt tensioning latch by turning release nut with a 3/4" wrench. See Figure
3.Replace old belt with a new Land Pride belt making sure the new belt is positioned correctly in all the pulley grooves.
4.Engage belt tensioning latch by turning the release nut with a 3/4" wrench.
5.Check for correct belt tension. Refer to Belt Tension in the “Adjustments” section on page 46.
6.Reinstall all belt covers and secure with hardware.
12697 |
Blades Rotation: CW / Center Blade Bolt: R.H Threads |
Top View of Left Hand Deck Belt Drive |
12698 |
Blades Rotation: CCW / Center Blade Bolt: L.H Threads |
Top View of Center and Right Deck Belt Drive |
Models 4011 Shown |
Belt Placement
Figure
13662 |
Blades Rotation: CW / Center Blade Bolt: R.H Threads |
Top View of Left Hand Deck Belt Drive |
13661 |
Blades Rotation: CCW / Center Blade Bolt: L.H Threads |
Top View of Center and Right Deck Belt Drive |
Models 4014 & 4016 Shown |
Belt Placement
Figure
26 | AFM4011, AFM4014 and AFM4016 All Flex Grooming Mowers | 7/28/06 |