Land Pride AFM4016 manual Application, Using This Manual, Owner Assistance

Land Pride

Introduction

Table of Contents

Land Pride welcomes you to the growing family of new product owners.

This AFM40 All-Flex Grooming Mower has been designed with care and built by skilled workers using quality materials. Proper assembly, maintenance, and safe operating practices will help you get years of satisfactory use from the machine.

Application

The 11, 14, and 16 foot All-Flex Mowers are designed and built by Land Pride to provide excellent cutting quality and performance on lush type turf grasses that are located on expansive and well manicured areas such as sports fields, theme parks, fairways, turf farms, and large estates.

The AFM4011 requires attachment to a 30-65 hp turf tractor while the AFM4014 and AFM4016 will deliver excellent performance when attached to 40-70 hp tractors. All AFM models are adapted for attachment to 540 rpm pull-type draw bar. They can be ordered with slip-clutch or conventional wing driveline configurations.

The mower offers independent deck flotation and zero turning radius due to the sleek frame design. When you need to transport one of these mowers from one mowing site to another on a public street or right-of-way the hydraulic wing cylinders will easily lift up the wing decks for a 5’-6" transport width on the AFM4011 or 6’-8" transport width on the AFM4014 and AFM4016 mowers.The contour following capability, highly productive cutting widths, and rear discharge design of the floating cutting decks will greatly reduce wide-area cutting times and still deliver finely groomed surfaces at mowing speeds from 2-6 mph.

See “Section 6: Specifications & Capacities” and

“Section 7: Features & Benefits” for additional information and performance enhancing options.

Using This Manual

•This Operator’s Manual is designed to help familiarize you with safety, assembly, operation, adjustments, troubleshooting, and maintenance. Read this manual and follow the recommendations to help ensure safe and efficient operation.

•The information contained within this manual was current at the time of printing. Some parts may change slightly to assure you of the best performance.

•To order a new Operator’s or Parts Manual contact your authorized dealer. Manuals can also be downloaded, free-of-charge from our website at www.landpride.com or printed from the Land Pride Service & Support Center which is already at your dealership.

Terminology

“Right” or “Left” as used in this manual is determined by facing the direction the machine will operate while in use unless otherwise stated.

Definitions

NOTE: A special point of information that the operator must be aware of before continuing.

IMPORTANT: A special point of information related to its preceding topic. Land Pride’s intention is that this information should be read and noted before continuing.

Owner Assistance

The Warranty Registration card should be filled out by the dealer at the time of purchase. This information is necessary to provide you with quality customer service.

If customer service or repair parts are required contact a Land Pride dealer. A dealer has trained personnel, repair parts and equipment needed to service the implement.

The parts on your All-Flex Grooming Mower have been specially designed and should only be replaced with genuine Land Pride parts. Therefore, should your All- Flex Grooming Mower require replacement parts go to your Land Pride Dealer.

Serial Number Plate

For prompt service always use the serial number and model number when ordering parts from your Land Pride dealer. Be sure to include your serial and model numbers in correspondence also. Refer to Figure 1 for the location of your serial number plate.

15015

Serial Number Plate Location for Model 4011

Figure 1

15016

Serial Number Plate Location for Models 4014 and 4016

Figure 2

7/28/06 AFM4011, AFM4014 and AFM4016 All Flex Grooming Mowers 315-160M 11