INSTALLATION
Left Side
Faceplate Bracket
Trim Flange
5)Place the bottom hooks of the Surround into the bottom slots of the Faceplate. Slightly pull up the Surround and push the top hooks into the top slots of the Faceplate. Push down to secure. Tug on the Surround to ensure it is securely locked in place.
OPTIONAL SCREEN
DOORS
1)Attach door bracket to sides using 4 screws.
Door Bracket attaches with 2 screws on each side.
2)Take the hoseclamps and put them over the back of each rivet. Squeeze the hoseclamp to secure onto rivets ensuring that the hoseclamp is touching the back side of the surround. The hoseclamp can now be released.
3)Remove the handles by removing the nut and screw. Install the new handles by plac- ing them in position over the holes on the surround louver. Put the screws through the holes and secure them by tightening them with a nut.
Backside of
Surround Shown
Hooks
Faceplate Slots
Double Screen Door: attach to left and right side of unit.
2) Slide the door(s) onto the hinges.
4)Place the emblem over the emblem design on the surround. Insert the studs through the holes. To secure them fi rst put on the split lock washer and then the nut and tighten.
5)Removethe2studsonthesidesoftheHood. Insert the new studs through the holes and secure them by fi rst putting on the washer and then tighten with a nut.
Faceplate
Surround
ACCENT KIT
INSTALLATION
1)Remove the rivets from the surround by pulling off the hoseclamp (located at the backside of surround) with a screwdriver or plyer.
DOUBLE DOOR OPTION
Remove the handles by removing the nut and screw. Install the new handles by plac- ing them in position over the holes on the door(s). Put the studs through the holes and secure them by tightening them with a nut.
16 | E33 FPI Direct Vent Gas Insert |
