Regency E33-LP, E33-NG Copy of Lighting Instruction Plate, Normal Operating Sounds GAS Appliances

OPERATING INSTRUCTIONS

COPY OF LIGHTING INSTRUCTION PLATE	AUTOMATIC
	CONVECTION
	FAN OPERATION
	The fan operates automatically.Turn the knob on
	the side of the faceplate to adjust to the desired
	speed. The fan will turn on as the stove comes
	up to operating temperature. After the unit has
	been turned off and the unit has been cooled
	to below useful heat output range, the fan will
	shut off automatically.

NORMAL OPERATING

SOUNDS OF

GAS APPLIANCES

It is possible that you will hear some sounds from your gas appliance.This is perfectly normal due to the fact that there are various gauges and types of steel used within your appliance. Listed below are some examples.All are normal operatingsoundsandshouldnotbeconsidered as defects in your appliance.

Blower:

FPI gas appliances use high tech blowers to push heated air farther into the room. It is not unusual for the fan to make a "whirring" sound when ON. This sound will increase or decrease in volume depending on the speed setting of your fan speed control.

Burner Tray:

The burner tray is positioned directly under the burner tube(s) and logs and is made of a differ- ent gauge material from the rest of the fi rebox and body. Therefore, the varying thicknesses of steel will expand and contract at slightly different rates which can cause "ticking" and "cracking" sounds. You should also be aware that as there are temperature changes within the unit. These sounds will likely re-occur. Again, this is normal for steel fi reboxes.

Blower Thermodisc:

When thermally activated switch turns ON, it will create a small "clicking" sound. This is the contact switch closing.

Pilot Flame:

While the pilot fl ame is on it will make a slight "whisper" sound.

Gas Control Valve:

As the gas control valve turns ON and OFF, a dull clicking sound may be heard. This is normal operation of a gas regulator or valve.

Unit Body and Firebox:

Different types and thicknesses of steel will ex- pand and contract at different rates resulting in some "cracking" and "ticking" sounds which will be heard throughout the cycling process.

E33 FPI Direct Vent Gas Insert 19