Table of Contents
Section 6: Specifications & Capacities
AFM4216 Series
Land Pride
Description | Specification / Capacity | Description | Specification / Capacity |
Discharge Type | Rear |
|
|
Cutting Width | 16’- 8” | Blade Drive Belt | 1 |
Overall Width | 16’ | Drive Belt Tension | Spring Loaded Idler with Overcenter |
|
|
| Release |
Transport Height | 8’ | Blade Bearing | Sealed Ball Bearings |
Transport Width | 6’- 8” With Lock Pins Installed | Blades | Low Lift (5/16" x 2 1/2" x 25") |
|
| 3 Each Per Deck | Optional Blades: |
|
|
| Medium Lift, High Lift & Mulching |
Overall Length | Blade Overlap | 1 1/4" | |
|
|
| |
Machine Weight | W/15” tires = 3,315 lbs. | Blade Spindle Speed | 2,302 R.P.M. |
| W/18” tires = 3,465 lbs. |
|
|
Tractor Horsepower | Minimum 40 HP / Maximum 70 HP | Blade Tip Speed | 18,340 F.P.M. |
Hitch | Pull Type with Adjustable Clevis and | Deck Tires | 10 each, Air tires with Sealant |
| Safety Tow Chain |
| 18 x 9.5 or 15 x 6.6 |
Tongue Support | 2,200 lb. Capacity Screw Jack | Deck Wheel Spindles | 1 1/4” w/Nylon Bushings |
Gearbox Support | 3/8” Steel Channel | Transport Tires | 2 each, 23 x 10.5 with Sealant |
Gearboxes | 540 RPM | Transport Locks | Automatic with Pull Rope Release |
Main Driveline (1) | Cat. lV Constant Velocity with Slip | Wing Deck Flex | 23 Degrees Left To Right |
| Clutch when wings are conventional |
| 22 Degrees Front To Back |
Deck Drivelines (3) | Cat. II with or without Slip Clutch | Center Deck Flex | 10 Degrees Left To Right |
|
|
| 22 Degrees Front To Back |
Cutting Height | 3/4" to 5 1/4" (In 1/4” increments) | Hydraulic Outlets | 1 Set Required |
Deck Size & Quantity | 3 each / 72” | Deck Cylinders | Dual Acting |
Deck Overlap | 8” | Gauge Wheel Arms | 1/4” Wall Square Tubing |
Deck Thickness | 3/16” | Turning Radius | Zero Turning Radius |
Front Center and | Mowing Capacity |
| |
| Outside Deck Corners | @ 2 mph | 4.0 Acres Per Hour |
|
| @4 mph | 8.1 Acres Per Hour |
|
| @ 6 mph | 12.1 Acres Per Hour |
|
|
|
|
Model 4216 Specification Drawing | 17853 |
|
|
38 | AFM4214 and AFM4216 | 11/14/08 |