Land Pride FDR2584, FDR2572 manual Frame

Land Pride Table of Contents

Section 1: Assembly and Set-Up

A-Frame

Refer to Figure 1-2:

1.There are flat washers placed between the rear braces (#1) and the rear hitch plates (#5) for shipping.

2.Remove the flat washers and reassemble the rear braces. Do not tighten bolt and nut at this time.

3.The lower holes of the A-Frame (#2) are bolted to the shipping crate with lag bolts for shipping.

4.Remove the lag bolts from the A-Frame.

5.Loosen the 5/8" nut (#6). This will allow the hitch to be rotated into to position.

6.Rotate the rear hitch braces (#1) up until the lower holes of the A-Frame (#2) line up with the top holes of the hitch plates on the deck. Secure with the 5/8” flange bolts (#3) and 5/8” flange nut (#4) already mounted in the holes of the front hitch plates.

7.Tighten all hardware in the rear hitch braces and A-Frame.

17365

Hitch Braces Assembly

Figure 1-2

10/15/07 FDR2572 & FDR2584 Grooming Mowers 310-262M 9