Table of Contents
Introduction
Land Pride
Land Pride welcomes you to the growing family of new product owners.
This Rotary Cutter has been designed with care and built by skilled workers using quality materials. Proper assembly, maintenance, and safe operating practices will help you get years of satisfactory use from the Rotary Cutter.
Application
Land Pride’s RCR1884 Series Rotary Cutter is built and designed by Land Pride for cutting on gentle slopes or slightly contoured
The RCR1884 cutter cuts through grass, weeds and light brush up to 1 1/2” in diameter with a cutting height range of 2” to 11”. Cutting blade tip speed is 17,113 fpm. It includes a 10 ga. (.135” thick) oval pan stump jumper and welded on full length skid shoes. A rear metal band shield is standard equipment. Optional shields are front rubber guard, front chain guard and rear chain guard.
See “Section 5: Specifications & Capacities” on page
29 and “Section 6: Features & Benefits” on page 30 for additional information.
Using This Manual
•This Operator’s Manual is designed to help familiarize you with safety, assembly, operation, adjustments, troubleshooting, and maintenance. Read this manual and follow the recommendations to help ensure safe and efficient operation.
•The information contained within this manual was current at the time of printing. Some parts may change slightly to assure you of the best performance.
•To order a new Operator’s or Parts Manual contact your authorized dealer. Manuals can also be downloaded,
Terminology
“Right” or “Left” as used in this manual is determined by facing the direction the machine will operate while in use unless otherwise stated.
Definitions:
IMPORTANT: A special point of information related to its preceding topic. Land Pride’s intention is that this information should be read and noted before continuing.
NOTE: A special point of information that the operator must be aware of before continuing.
Owner Assistance
The Warranty Registration card should be filled out by the dealer at the time of purchase. This information is necessary to provide you with quality customer service.
If customer service or repair parts are required contact a Land Pride dealer. A dealer has trained personnel, repair parts and equipment needed to service the cutter.
The parts on your Rotary Cutter have been specially designed and should only be replaced with genuine Land Pride parts. Therefore, should your cutter require replacement parts go to your Land Pride Dealer.
Serial Number Plate
For prompt service always use the serial number and model number when ordering parts from your Land Pride dealer. Be sure to include your serial and model numbers in correspondence also. Refer to Figure 1 for the location of your serial number plate.
24653 |
Serial Number Plate Location
Figure 1
Further Assistance
Your dealer wants you to be satisfied with your new Rotary Cutter. If for any reason you do not understand any part of this manual or are not satisfied with the service received, the following actions are suggested:
1.Discuss the matter with your dealership service manager making sure he is aware of any problems you may have and that he has had the opportunity to assist you.
2.If you are still not satisfied, seek out the owner or general manager of the dealership, explain the problem and request assistance.
3.For further assistance write to:
Land Pride
Service Department
P.O. Box 5060
Salina, KS
lpservicedept@landpride.com
8 | RCR1884 Series Rotary Cutters | 9/24/08 |
