Land Pride | Table of Contents |
Section 1: Assembly and
22311
Driveline Shortening
Figure
Refer to Figure
6.With driveline profiles pulled apart, apply multi- purpose grease to the inside of the outer profile and reassemble the two profiles.
7.Attach inner driveline yoke to the gearbox shaft and outer driveline yoke to the tractor's PTO shaft.
8.The driveline should now be moved back and forth to insure that both ends are secured. Reattach any end that is loose.
Refer to Figure
IMPORTANT: Two small chains are supplied with the driveline. These chains must be attached to outer and inner driveline yoke shields and to the cutter deck and tractor to restrict driveline shields from rotating.
9.Hook a safety chain in the hole on the outer driveline yoke shield and its opposite end to the tractor.
10.Hook the other safety chain in the hole on the inner driveline yoke shield and its opposite end to the cutter.
11.Start tractor and raise Rotary Cutter just enough to remove support blocks fro under the cutter deck.
12.Slowly engage tractor’s
9/24/08 | RCR1884 Series Rotary Cutters | 17 |