Land Pride

Assembly Instructions

23719

Front Rack Assembly To Standard Brush Guard

Series 00 & 10 ST Trekers

Figure 3

Assembly Instructions for

Kit No. 701-053A

Front Rack mounted to Standard Brush Guard (Reference Series 00 &10 ST Trekers)

Refer to Figure 3:

1.Align front two tabs on the Front Rack (#2) with top two tabs on the Standard Brush Guard (#6). Insert two 5/16"-18 x 1-1/2 GR5 Bolts (#7) through tabs in Front Rack (#2), 5/8" long spacers (#3) and tabs in Brush Guard (#6). Secure with 5/16" hex lock nuts (#10). Do not tighten.

2.Attach back two tabs on Front Rack (#2) to the four post accessory bar with two 1-1/2" U-Clamps (#4), 5/16" -18 x 2" lg. carriage bolts (#8), and 1 1/8" long spacers (#5), secure with 5/16" hex lock nuts (#9).

Do not tighten.

3.Adjust the Front Rack (#2) to be level and centered on the Treker.

4.Tighten all 5/16" hex lock nuts (#9 & #10) to 17 ft. lbs of torque.

4

Manual No. 701-123M

2/23/07

Page 4
Image 4
Land Pride 701-171a, ST Front Rack, 701-053a, 701-122a, 701-126a Assembly Instructions for Kit No -053A, Do not tighten