Placing the Original Document

Placing the Original Document

When using the Automatic Document Feeder

With the Automatic Document Feeder, originals placed into the Document Feed Tray are fed in one sheet at a time, copied, then fed out. Please follow the instructions provided when using this device. Failure to follow these instructions may cause a misfeed, damage to the original or other complications.

Originals should follow these standards

•Type of Paper:Plain paper(50–110 g/m2)

•Paper Size: LT - ST(A4L–A5L)

Originals that are not compatible with the Automatic Document Feeder

•Typing paper, paraffin paper and other thin paper types.

•Thick paper.

•Sizes that are larger than LT(A4) or smaller than ST (A5).

•OHP transparencies, tracing paper or other transparent paper types.

•Wrinkled, folded, curled or torn originals.

•Originals that are stapled or are attached with paper clips.

•Carbon paper or paper with coated surfaces.

•To produce copies from an original document described above, place it on the Original Glass.

Copier Functions

3 - 1