Selecting the Paper Tray

Selecting the Paper Tray

How to select a paper tray

1 Press the Paper Select key to select the paper source.

Paper Drawer

• No indicators are ON when the Paper Drawer is selected

Manual Bypass Tray

• The “Manual Bypass” indicator turns ON when Manual Bypass tray is selected.

Paper Feed Unit

• The “Paper Feed Unit” indicator turns ON when the Paper Feed Unit is selected.

Note: Be sure to change the “U7: Paper Size Select” User’s Choice setting

whenever a different size of paper is loaded into the Paper Tray. See “U7: Paper Size Select” on page 5-6.

The Paper Tray is prioritized when the Initial Mode is enabled. The Paper Feed Unit can be prioritized in the Initial Mode through the User’s Choice Mode. See “UA: Tray Priority (for Copier Mode)” on page 5-8.

Should the paper supply run out while copies are being output from the Paper Tray, copying can continue through the Paper Feed Unit if the same size paper has been loaded into the Paper Feed Unit. This feature is called Auto Tray Switching.

Copier Functions

3 - 5