Copy Paper

See: paper

Copy Quantity

This display or part of a Touch Screen shows the requested number of

 

copies.

Copy Size Keys

Keys used to input the desired size of the copy.

Darker Copies

This term refers to the amount of toner placed on the copy through the

 

imaging process. The amount of toner is controlled by the “darkness” of

 

the original and the amount of light used during the exposure process;

 

more light means less toner or image density.

Developer Material

This is a supply used in the copier. It usually consists of two parts; a

 

carrier material and the toner. The developer material is only used by a

 

technician when installing a new unit or when cleaning a Developer Unit.

Developer Unit

An assembly located near the drum inside the copier that delivers the

 

toner to the drum. It allow the correct amount of toner to be placed on the

 

drum for each image.

Display Panel

This is an LCD panel showing: operation status, error messages, and

 

function menus.

Document Feed Tray

The Tray where an original document is placed to feed into an ADF for

 

automatic feeding and copying.

Document Guide

These Guides are located in the Document Feed Tray. When correctly

 

positioned against the sides of an original document, they help to position

 

the pages of the document.

Document Receiving

A Tray used to accumulate the pages of an original document that have

Tray

completed the copying process.

Document Scale

Two scales located to the front and left of the Exposure Glass intended to

 

help locate original documents placed on the Glass for manual copying

 

and to identify a part of an original during the Editing process.

Documents

The set of pages either placed on the Exposure Glass or in the ADF to be

 

copied.

Drum Assembly

The unit located inside the copier that receives the image during the

 

exposure and imaging process and transfers this image to the copy paper.

 

It is light sensitive and should be protected from bright lights.

Duplexed Copies

Copies that have been imaged on both sides of the sheet.

Energy Saver Key

A Key used to place the copier into, or bring it out of an Energy Saver

 

Mode. In the Energy Saver Mode, the amount of energy consumed by the

 

copier is reduced.

G-2