processors mode supported.
Disabled Disables CPU Hyper Threading Feature.
Quick Power On Self Test : The default setting is “Enabled”. This speeds up the Power On Self Test (POST) by skipping some items that are normally checked during the full POST. If your system is functioning normally, you can choose this feature to speed up the booting process.
First / Second / Third / Other Boot Device : The BIOS attempts to load the operating system from the devices in the sequence selected in these items. The settings are Floppy, LS/ZIP,
Boot Up Numlock Status : The default setting is “On”. If set “Off”, the cursor controls will function on the numeric keypad.
Security Option : This setting controls the password in the main screen. The options are “Setup” and “System”. Select “Setup” and it will protect the Setup Utility settings from being tampered with. Select “System” if you want to use password feature every time the system boots up. The default setting is “Setup”. You can create your password by using the “SUPERVISOR/USER PASSWORD” utility on the main program screen.
PS/2 Mouse Function Control : When this option is set Enabled, AMIBIOS supports a PS/2 type mouse. The settings are Enabled or Disabled. The default setting is Disabled. System Boot Up Sequence.
HDD S.M.A.R.T. Capability: Enable installs SMART
Console Redirection: The console Redirect capability allows a system with no keyboard to transmit keyboard data to a host system via the COM port.
Enabled | Attempt to redirect console via COM port. | |
Disabled | Attempt to redirect console when keyboard absent. | |
| If keyboard is plug in the Controller board, the Console | |
Auto | Redirection will not display BIOS screen on remote PC. | |
If keyboard is not plug in the Controller board, the Console | ||
| ||
| Redirection will display BIOS screen on remote PC. |
Baud Rate : Specify Baud Rate of console redirection.