3: Operations
G
r
o
SLP: show outlets<Enter>
Outlet Outlet Wakeup Post-On
ID Name State Delay seconds)
u
p
.A1 TowerA_Outlet1 On 0
.A2 TowerA_Outlet2 On 0
.A3 TowerA_Outlet3 On 0
A
.A4 TowerA_Outlet4 On 0
d
.A5 TowerA_Outlet5 On 90
m
.A6 TowerA_Outlet6 On 0
.A7 TowerA_Outlet7 On 0
i
.A8 TowerA_Outlet8 On 0
n
.A9 TowerA_Outlet9 On 0
.A10 TowerA_Outlet10 On 0
i
.A11 TowerA_Outlet11 On 0
s
.A12 TowerA_Outlet12 On 0
t
.A13 TowerA_Outlet13 On 0
.A14 TowerA_Outlet14 On 0
r
.A15 TowerA_Outlet15 On 0
a
.A16 TowerA_Outlet16 On 0
t
More (Y/es N/o):
Outlet Options:
i
Sequence Interval: 2 seconds
G
Reboot Delay: 15 seconds
Group Administration
Creating a group name
The Create Group command creates a new group name.
To create a group name:
3. At the command prompt, type create group, optionally followed by a
descriptive name of up to 24 alphanumeric and other typeable characters (ASCII
33 to 126 decimal); spaces are not allowed; group names are not case sensitive.
Press Enter.
Example
The following command creates a group named ServerGroup_1:
SLP: create group ServerGroup_1<Enter>
Removing a group name
The Remove Group command removes a group name.
To remove a group name:
4. At the command prompt, type remove group, optionally followed by a
username. Press Enter.
Example
The following command removes group name ServerGroup_1:
SLP: remove group ServerGroup_1<Enter>
SecureLinx SLP Remote Power Manager 48