3: Operations
1. At the command prompt, type show units and press Enter.
Example
SLP: show units<Enter>
Unit Unit
ID Name
.A Florida_HQ_1
Creating a descriptive infeed name
The Set Infeed Name command assigns a descriptive name to an infeed. This
descriptive name is displayed when the Show Traps command is issued. See
Displaying trap configuration information on page 76 for more information on the
Show Traps command.
To create an infeed name:
1. At the command prompt, type set infeed name, followed by the absolute
infeed name, then the descriptive name of up to 24 alphanumeric and other
typeable characters (ASCII 33 to 126 decimal - spaces are not allowed).
2. Press Enter.
Example
The following command adds the descriptive name HQ_1_Infeed_A to the infeed on
the unit:
SLP: set infeed name .aa HQ_1_Infeed_A<Enter>
Displaying Infeed information
The Show Infeeds command displays information about all infeeds. This information
includes the absolute and descriptive infeed names.
To display unit information:
1. At the command prompt, type show infeeds and press Enter.
Example
SLP: show infeeds<Enter>
Input Input
Feed ID Feed Name
.AA HQ_1_Infeed_A
Creating a descriptive tower name
The Set Tower Name command assigns a descriptive name to a tower. This
descriptive name is displayed when the Show Traps command is issued. See
Displaying trap configuration information on page 76 for more information on the
Show Traps command.
To create a tower name:
3. At the command prompt, type set tower name, followed by the absolute tower
name, then a descriptive name of up to 24 alphanumeric and other typeable
characters (ASCII 33 to 126 decimal - spaces are not allowed). Press Enter.
SecureLinx SLP Remote Power Manager 56