3: Operations
1. At the command prompt, type set option more, followed by enabled or
disabled and press Enter.
Setting the temperature scale
The Set Option TempScale command sets the temperature scale that the SLP will
report in.
To set the temperature scale:
1. At the command prompt, type set option tempscale, followed by Celsius or
Fahrenheit and press Enter.
Displaying system options
The Show Option command displays all system option information.
To display system option information:
2. At the command prompt, type show options and press Enter.
Example
SLP: show options
System Options
Display Orientation: NORMAL
Strong Passwords: DISABLED
Configuration Reset Button: ENABLED
More Prompt: ENABLED
Temperature Scale: CELSIUS
Creating a descriptive unit name
The Set Unit Name command assigns a descriptive name to a unit. This descriptive
name is displayed when the Show Traps command is issued. See Displaying trap
configuration information on page 76 for more information on the Show Traps
command.
To create a unit name:
3. At the command prompt, type set unit name, followed by the absolute unit
name, then the descriptive name of up to 24 alphanumeric and other typeable
characters (ASCII 33 to 126 decimal - spaces are not allowed).
4. Press Enter.
Examples
The following command adds the descriptive name Florida_HQ_1 to unit.a:
SLP: set unit name .a Florida_HQ_1<Enter>
Displaying unit information
The Show Units command displays information about the unit. This information
includes the absolute and descriptive unit names.
To display unit information:
SecureLinx SLP Remote Power Manager 55