Lantronix UDS2100 manual Connect Protocol, Connect Mode Passive Connection, Endpoint Configuration

4: Configuration Using Web Manager

2. In the available fields, enter or modify the following information:

Connect Protocol

Protocol

From the drop-down menu, select TCP.

Connect Mode: Passive Connection

Accept Incoming	Select Yes to accept incoming connections. The default
	setting is Yes.
Password Required	Determines whether a password is required for an
	incoming passive connection. This field is not available
	when a password is set for Telnet mode. The default
	setting is No.
Password	If Password Required was set to Yes, enter the password
	for passive connections.

Connect Mode: Active Connection

	Active Connect	Select None (default) to disable Active Connect.
		Otherwise, indicate the connection type from the drop-
		down list:
		With Any Character: Attempts to connect when any
		character is received from the serial port.
		With Active Mdm Ctrl In: Accepts external
		connection requests only when the
		modem_control_in input is asserted.
		With Start Character: Attempts to connect when it
		receives a specific start character from the serial
		port. The default start character is carriage return.
		Manual Connection: Attempts to connect when
		directed by a command string received from the
		serial port.
		Auto Start: Automatically connects to the remote IP
		address and port after booting up.
	Start Character	If Active Connect is set to With Start Character, enter the
		start character in this field. The default setting is 0D.
	Modem Mode	Indicates the on-screen response type when in Modem
		Mode (if Modem Mode is enabled). The default setting is
		None.
Endpoint Configuration
	Local Port	Enter the local port number.
	Auto increment for	Select to auto-increment the local port number for new
	active connect	outgoing connections. The range of auto-incremented
		port numbers is 50,000 to 59,999 and loops back to the
		beginning when the maximum range is reached. Disabled

UDS2100 User Guide 31