Lantronix UDS2100 - page 73

UDS2100 User Guide 73

1

13

3:

:

T

Te

ec

ch

hn

ni

ic

ca

al

l

S

Sp

pe

ec

ci

if

fi

ic

ca

at

ti

io

on

ns

s

Table 13-1. UDS2100 Technical Specifications

Category Description

CPU Lantronix DSTNI-EX 48 MHz clock

Internal CPU

Memory

256 KB zero wait state SRAM

Flash 2 MB Flash

EEPROM 2 KB EEPROM

Serial Interface 2 DB9M DTE serial ports

Software-selectable baud rate from 300 to 921 KBaud (when High

Performance is selected)

Software-selectable RS232, RS422 or RS485 (2 and 4 wire support)

Serial Line Formats Characters: 7 or 8 data bits

Stop bits: 1 or 2

Parity: odd, even, none

Modem Control DTR, DSR

Flow Control Hardware: CTS/RTS

Software: XON/XOFF

Power Input 9-30 VDC on barrel connector (1.8W maximum consumption)

Network Interface 1 RJ45 10Base-T/100Base-TX Ethernet port

Software selectable Ethernet speed 10/100/Auto

Software selectable Half/Full/Auto duplex

Dimensions Height: 2.3 cm (0.9 in)

Width: 7.3 cm (2. 9 in)

Length : 9.5 cm ( 3.75 in)

Weight 0.26 kg ( 0.6 lb)

Temperature Operating range: 0° to 60° C (32° to 140° F)

Note: Operating range for UDS2100-IAP only: -40° to 70° C (-40° to 158° F)

Storage -40° to 85° C (-40 to 185° F)

Relative Humidity Operating 10% to 90% non-condensing, 40% to 60% recommended

Storage 10% to 90% non-condensing

Case Metal enclosure with integrated wall mounts

Optional 35 mm Din Rail mount available

Protocols Supported ARP, UDP/IP, TCP/IP, Telnet, ICMP, SNMP, DHCP, BOOTP, TFTP, and

HTTP

Contents

Main Copyright & Trademark Contacts Revisions Contents Page Page Figures Tables Page Additional Documentation Page Page Protocol Support Additional Features Configuration Methods Product Information Label Page Installing the UDS Required Information Hardware Address IP Address Assigning the IP Address: DeviceInstaller Installing DeviceInstaller Assigning an IP Address Adding the Unit to the Manage List Accessing the UDS2100 Using DeviceInstaller Viewing the Current Configuration 3: Getting Started UDS2100 User Guide 18 Setting Next Step Assigning the IP Address: Serial Port Login Page Page Automatic IP Address Configuration Static IP Address Configuration Ethernet Configuration Server Configuration Host List Configuration Channel 1 and Channel 2 Configuration Serial Settings Page 4: Configuration Using Web Manager UDS2100 User Guide 29 Pack Control Flush Input Buffer (Serial to Network) Connection Settings - TCP 4: Configuration Using Web Manager UDS2100 User Guide 31 2. In the available fields, enter or modify the following information: Connect Protocol Connect Mode: Passive Connection Connect Mode: Active Connection 4: Configuration Using Web Manager UDS2100 User Guide 32 Common Options Disconnect Mode Connection Settings - UDP Apply Settings Apply Factory Defaults Page Serial Port Connection Exiting Setup Mode Page Netmask: Number of Bits for Host Part Note: Class A: 24 bits; Class B: 16 bits; Class C: 8 bits Change Telnet Configuration Password DHCP Name Page Page I/F (Interface) Mode Flow Port Number Connect Mode Page 7: Setup Mode: Channel Configuration UDS2100 User Guide 45 a) Incoming Connection b) Response c) Active Startup 7: Setup Mode: Channel Configuration UDS2100 User Guide 46 Command String Result if remote IP is 129.1.2.3 and remote port is 1234 d) Datagram Type e) Modem Mode Page Send the Escape Sequence (+++) in Modem Mode Auto Increment Source Port Remote IP Address Remote Port DisConnMode Flush Mode (Buffer Flushing) Pack Control Packing Interval Trailing Characters Send Characters DisConnTime (Inactivity Timeout) Send Characters Telnet Terminal Type Channel (Port) Password Page Page Security Settings (Option 6) Disable SNMP SNMP Community Name Disable Telnet Setup Disable TFTP Firmware Update Disable Port 77FE (Hex) Disable Web Server Disable Web Setup Disable ECHO Ports Default Settings (Option 7) Channel 1 and Channel 2 Configuration Defaults Expert Settings Defaults Security Settings Defaults Page Page Using TFTP: Command Line Interface Recovering the Firmware Using the Serial Port and DeviceInstaller Page Page 10: Monitor Mode UDS2100 User Guide 65 Command Command Name Function Response Meaning Page Page 11: Troubleshooting and Contact Information UDS2100 User Guide 68 Problems and Error Messages Problem/Message Reason Solution 11: Troubleshooting and Contact Information UDS2100 User Guide 69 Problem/Message Reason Solution Technical Support Page Page Page Category Description Page Page BOOTP ARP and Telnet Page Scientific Calculator Page Page Disclaimer and Supplementary Information Manufacturers Contact Index