Lathem 1500E HOW TO PROGRAM THE CLOCK

To enter the program setting mode, you should plug the AC adapter into the AC outlet and

remove the cover. Thereafter press the SELECT button once. Then the clock goes into the

program mode showing the " " on the display positioned at the "TIME".

Function of 3 control buttons

SELECT : You can select the desired program setting mode by pressing this SELECT button.

Selected program setting mode is indicated by the " " mark on the display.

CHANGE : When you press the CHANGE button, you can increment the set value.

SET : You can set the value selected on the display by pressing the SET button. Thereafter you

press this SET button again, you can return the clock to the normal operation mode.

HOW TO PROGRAM THE CLOCK

Program modes

Control buttons

Contents

Main Lathem Time Corporation www. lathem. com (800) 241-4990 This User's Manual and its contents are copyrighted by LATHEM TIME CORP. with all rights reserved. WARNING F C INTRODUCTION BEFORE USING THE TIME CLOCK Accessories <Back view> Configuration <Cover off> <Front view> Page HOW TO PROGRAM THE CLOCK RADIO SIGNAL RECEPITION SETTING THE DISPLAY FORMAT SETTING THE TIME SETTING THE DATE SETTING THE 12/24 HOUR SETTING THE PRINT ORDER SETTING THE PRINT STYLE SETTING THE YEAR DIGIT SETTING THE HOUR/MIN. SETTING THE LEADING ZERO SETTING THE COMMENT SETTING THE LANGUAGE SETTING THE PRINT METHOD Page SETTING THE STARTING DATE OF DAYLIGHT SAVING TIME SETTING THE DAYLIGHT SAVING TIME Page SETTING THE ENDING DATE OF DAYLIGHT SAVING TIME DELETING THE DAYLIGHT SAVING TIME SETTING SETTING THE TIME ZONE SETTING THE PASSWORD REGISTERING THE PASSWORD HOW TO CHANGE SETTING WHEN THE PASSWORD IS SET 3. SETTING THE DISPLAY FORMAT CANCELING THE PASSWORD S Page WALL MOUNTING Page S ERROR No. APPEARS Refer to the following list for proper operation. TROUBLESHOOTING OTHER FAILURES The time clock does not operate. The time clock does not print. The card is jammed. SPECIFICATIONS Limited One-Year Warranty