Lathem 1500E S

Press the SELECT button and position

the " " mark at the "PASSWORD".

At that moment, first two digits "12"

flashes. (The flashing means it can be

changed.)

Press the CHANGE button to set at "00".

And then press the SET button.

At that moment, the flashing changes to

last two digits "34".

Step 3

Press the CHANGE button to set at "00".

And then press the SET button.

Step 4

After you finish canceling the password,

press the SET button once again.

Now the password canceling has been

completed. Replace the cover and lock.

IMPORTANT: If you do not complete

Step 5, the clock will not print.

Step 5

PASSWORD

SELECT CHANGE SET

TU WE TH FR SA SUMO

Contents

Main Lathem Time Corporation www. lathem. com (800) 241-4990 This User's Manual and its contents are copyrighted by LATHEM TIME CORP. with all rights reserved. WARNING F C INTRODUCTION BEFORE USING THE TIME CLOCK Accessories <Back view> Configuration <Cover off> <Front view> Page HOW TO PROGRAM THE CLOCK RADIO SIGNAL RECEPITION SETTING THE DISPLAY FORMAT SETTING THE TIME SETTING THE DATE SETTING THE 12/24 HOUR SETTING THE PRINT ORDER SETTING THE PRINT STYLE SETTING THE YEAR DIGIT SETTING THE HOUR/MIN. SETTING THE LEADING ZERO SETTING THE COMMENT SETTING THE LANGUAGE SETTING THE PRINT METHOD Page SETTING THE STARTING DATE OF DAYLIGHT SAVING TIME SETTING THE DAYLIGHT SAVING TIME Page SETTING THE ENDING DATE OF DAYLIGHT SAVING TIME DELETING THE DAYLIGHT SAVING TIME SETTING SETTING THE TIME ZONE SETTING THE PASSWORD REGISTERING THE PASSWORD HOW TO CHANGE SETTING WHEN THE PASSWORD IS SET 3. SETTING THE DISPLAY FORMAT CANCELING THE PASSWORD S Page WALL MOUNTING Page S ERROR No. APPEARS Refer to the following list for proper operation. TROUBLESHOOTING OTHER FAILURES The time clock does not operate. The time clock does not print. The card is jammed. SPECIFICATIONS Limited One-Year Warranty