Lathem 1500E SETTING THE DISPLAY FORMAT

SETTING THE DISPLAY FORMAT

It is recommended that during initial installation you manually set the time and date. The

1500E will automatically correct itself when it receives a radio signal from the atomic clock.

Example: Change the time from 10:08 to 10:09.

Press the SELECT button and position

the " " mark at the "TIME".

At that moment, the "Hour" flashes. (The

flashing means it can be changed.)

Change the "Hour".

In case of the example, press the SET

button because the hour is not to be

changed.

At that moment, the flashing changes

from "Hour" to "Minute".

Step 1

TIME

SELECT CHANGE SET

Change the "Minute".

Press the CHANGE button to set at "09",

and then press the SET button.

At that moment, the "Second" starts to

run from "00".

Step 2

TIME

SELECT CHANGE SET

TIME

After you finish setting the time, press

the SET button once again.

Now the time setting has been

completed. Replace the cover and lock.

IMPORTANT: If you do not complete

Step 3, the clock will not print.

Step 3

TU WE TH FR SA SUMO

Second Hour Minute

ENGLISH