Lathem 1500E SETTING THE LEADING ZERO

SETTING THE LEADING ZERO

Example: Change the leading zero to "ZERO: Disabled".

Press the SELECT button and position

the " "mark at the "LEADING ZERO".

At that moment, the flashing digit

indicates "Order Options" of the leading

zero.

(The flashing means it can be changed.)

Step 1

LEADING

ZERO

LEADING

ZERO

SELECT CHANGE SET

After you finish setting the leading zero,

press the SET button once again.

Now the leading zero setting has been

completed. Replace the cover and lock.

IMPORTANT: If you do not complete

Step 2, the clock will not print.

Step 2

Order Options

ZERO Disabled

ZERO Enabled

Print Example

JAN 1 PM3:00

JAN 01 PM03:00

In case of the example, press the CHANGE

button to set at "1". And then press the

SET button.

TU WE TH FR SA SUMO

ENGLISH

Contents

Main Lathem Time Corporation www. lathem. com (800) 241-4990 This User's Manual and its contents are copyrighted by LATHEM TIME CORP. with all rights reserved. WARNING F C INTRODUCTION BEFORE USING THE TIME CLOCK Accessories <Back view> Configuration <Cover off> <Front view> Page HOW TO PROGRAM THE CLOCK RADIO SIGNAL RECEPITION SETTING THE DISPLAY FORMAT SETTING THE TIME SETTING THE DATE SETTING THE 12/24 HOUR SETTING THE PRINT ORDER SETTING THE PRINT STYLE SETTING THE YEAR DIGIT SETTING THE HOUR/MIN. SETTING THE LEADING ZERO SETTING THE COMMENT SETTING THE LANGUAGE SETTING THE PRINT METHOD Page SETTING THE STARTING DATE OF DAYLIGHT SAVING TIME SETTING THE DAYLIGHT SAVING TIME Page SETTING THE ENDING DATE OF DAYLIGHT SAVING TIME DELETING THE DAYLIGHT SAVING TIME SETTING SETTING THE TIME ZONE SETTING THE PASSWORD REGISTERING THE PASSWORD HOW TO CHANGE SETTING WHEN THE PASSWORD IS SET 3. SETTING THE DISPLAY FORMAT CANCELING THE PASSWORD S Page WALL MOUNTING Page S ERROR No. APPEARS Refer to the following list for proper operation. TROUBLESHOOTING OTHER FAILURES The time clock does not operate. The time clock does not print. The card is jammed. SPECIFICATIONS Limited One-Year Warranty