
Settings and Calibration | Model 7500ZA | |
|
|
|
6.6 Parameter Setting
From the Parameter Setting screen you can set or adjust various parameters of the instrument such as time, key lock, etc. Settable items are as follows:
Description of setting items
•Current Time : Current year, month, date, day of the week, hour, and minute setting. (The display appears in this order.)
•Note: The clock backup time is 2 days. If power is turned on after being off for 2 days or longer, the time must be set again.
•Key Lock : Invalidates any key operation except canceling the key lock.
•Output Hold : Sets whether Calibration Output is held or not, and the holding value setting.
•Response time : Sets the response time of electrical system.
•Average Period : Sets the moving average time.
•Backlight Timer : Sets automatic OFF of the backlight of display unit and its timer.
•Contrast : Adjusts contrast of the LCD.
•Maintenance Mode : A password protected entry screen used to access the instrument’s maintenance mode.
*For the maintenance mode, see Section 6.7.
1.Enter the “Parameter Setting” screen from the user mode, and the display shown at right appears. Use the UP or DOWN key to move the cursor to the desired item and then press ENT.
Teledyne Analytical Instruments | 60 |