NDIR Gas Analyzer
Display And Operation Panels | 27 | |
5.1 | Front Panel Description | 27 |
5.2 | Overview of Display and Operation Panels | 29 |
5.3 | Outline of Display Screen | 30 |
5.4 | Basic Operation | 34 |
Settings and Calibration | 35 | |
6.1 | Range Switch | 35 |
| 6.1.1 Setting the Range Switch Mode | 35 |
| 6.1.2 Manual Range Mode | 36 |
| 6.1.3 Range Identification Contacts | 36 |
6.2 | Calibration Setting | 37 |
| 6.2.1 Setting the Span Gas Concentration | 37 |
| 6.2.2 Manual Zero Calibration | 38 |
| 6.2.3 Setting the Calibration Range | 40 |
| 6.2.4 Setting the Component/Range for Auto Calibration | 42 |
6.3 | Alarm setting | 44 |
| 6.3.1 Setting Alarm Parameters | 44 |
| 6.3.2 Hysteresis Setting | 46 |
| 6.3.3 Peak Alarm Setting | 47 |
6.4 | Setting Up the Auto Calibration | 49 |
| 6.4.1 Auto Calibration | 49 |
| 6.4.2 Forced Run/Stop Of Auto Calibration | 52 |
| 6.4.2.1 Execution of auto calibration (only once) | 52 |
| 6.4.2.2 Forced stop of auto calibration | 53 |
6.5 | Setting Auto Zero Calibration | 55 |
| 6.5.1 Auto Zero Calibration | 55 |
| 6.5.2 Forced Run/Stop of Auto Zero Calibration | 57 |
| 6.5.2.1 Execution of auto zero calibration (only once) | 58 |
| 6.5.2.2 Forced stop of auto zero calibration | 58 |
6.6 | Parameter Setting | 60 |
6.7 | Maintenance Mode | 68 |
| 6.7.1 Sensor Input Value screen | 68 |
| Teledyne Analytical Instruments | xi |
