Display and Operation Panels

Model 7500ZA

 

 

 

5.3 Outline of Display Screen

(1)Measurement mode screen (appears when the power is turned on)

The measurement screen depends on the number of components. The following screen configuration is shown as an example for NO, SO2, CO2, CO and O2 (output: 12 channels).

Scroll the UP and DOWN keys to display more than 5 channels.

No.

Name

Function

(1)

Component display

Displays the component of instantaneous value, corrected

 

 

instantaneous value, corrected average value, etc.

(2)

Concentration display

Displays the measured value of concentration.

(3)

Range display

Displays the range values.

(4)

Unit display

Displays the unit with ppm or mg/m3 and vol%.

(5)

Average time display

Displays the average time.

Instantaneous value and concentration value:

The concentration display of Ch (component) where sampling components such as “CO2”, “CO” and “O2” are displayed in the component display, are the current concentration values of the measured components contained in sample gas under test.

Teledyne Analytical Instruments

30

Page 46
Image 46
Teledyne 7500ZA operating instructions Outline of Display Screen, Name Function