NDIR Gas Analyzer | Instalation |
|
|
•Isolated output (from each DO and ground)
To avoid external interference, the wiring from the analog output signal, O2 sensor input and contact input should be run separately from that of power supply and contact output.
Note: Avoid excess noise generated by other nearby equipment, by grounding the analyzer and using properly shielded cables.
(5)Communication:
(6)Timing of Contact Output for Calibration
1.Manual calibration: (See “Item 6.8 Calibration” if the analyzer is equipped with the auto calibration feature).
Teledyne Analytical Instruments | 21 |
