Installation | Model 7500ZA | |
|
|
|
|
|
|
3.4.6 Example Configuration of Sample System
The following illustrates a typical sample system configuration for five component gas measurement monitoring a combustion exhaust gas from boiler, refuse incinerator, etc.
Contact TAI for other system configurations to match your specific application.
Name | Description | Name | Description | |
(1) Gas extractor | Gas extractor with a | 8) Flowmeter | Adjusts and monitors | |
heating type stainless | the flow rate of the | |||
|
| |||
| steel filter of standard |
| sample gas. | |
| mesh 40µm. |
|
| |
(2) Mist filter | Removes drain, mist, | 9) Reference gas | Reference gas used for | |
and dust. | calibrating zero and | |||
|
| |||
(3) Safety drain trap | The safety drain trap is |
| span of the analyzer, | |
divided into two spaces |
| depending on the | ||
|
| |||
| for positive and |
| measured gas. | |
| negative pressure. It |
|
| |
| monitors |
|
| |
| and adjusts the sample |
|
| |
| gas pressure. |
|
| |
(4) Gas aspirator | For aspiration of the | 10) Zirconia O2 | External zirconia | |
sensor | oxygen sensor used for | |||
| sample gas | |||
|
|
|
Teledyne Analytical Instruments | 14 |
