17. SETTING THE INITIAL NUMBER
30
29
1
Press the [SELECT] button and position
the " " n ext to the "INITIAL
NUMBER" mark.
At that moment, t he fla shing " "
indicates th e 1st digit of th e initial
number.
(The flashing means it can be changed.)
2Set the "Initial Number".
In case of th e example, press the
[CHANGE] button to set at "1". And
then press the [SET] button.
At that moment, the 2nd digit of
"Initial Number" appears next to "1"
(the 1st digit).
Example: Setting the initial number to "123". Refer to "16. SETTING THE NUMBER".
3Set the correct numbers in the same
manner as Step 2. And then press the
[SET] button.
Note: Up to 8 digits can be set,
however the number of digits for
"Initial Number" depends on now you
set at the "Number".
Note: When the "Number Digit" has
been set at "3", " " doesn't appear
next to "3" (the 3rd digit).
SELECT CHANGE SET
INITIAL
NUMBER
SELECT CHANGE SET
INITIAL
NUMBER
SELECT CHANGE SET
INITIAL
NUMBER
4After you finish setting t he initial
number, press the [SET] button once
again.
SELECT CHANGE SET
INITIAL
NUMBER
The 2nd
digit
The 1st
digit
The1st
digit
MO TU WE TH FR SASU
Now the initial number sett ing has
been completed. Replace the cover
and lock.
Important: If you do not comp lete Step
4, the Time Recorder will not print.