PC100 Terminal User’s Guide
2
CHAPTER 2
Mounting the PC100Check your package contents to make sure everything is accounted for before
starting. Decide where to mount your clock. Keep in mind that the AC adapter
plugs into a wall outlet.
To mount the clock, you need the following items:
Drill with a 5/16” bit
Hammer
Phillips head screwdriver
Pencil
1. Screw the mounting bracket to the wall
» Hold the bracket against the wall so the
top (arrow pointing Up) is 54 inches from
the floor
» Mark the 3 holes with a pencil
» Remove the bracket and drill a 5/16-inch
hole at each mark
» Insert an anchor into each hole, tapping it
with a hammer until it is flush against the
wall
» Align the mounting bracket back on the wall
» Insert each screw through the bracket into the anchors, and tighten
securely