Lawn-Boy 10356, 10357, 10358 Adjusting the Cutting Height, Adjusting the Handle Height, Front

Models: 10356, 10357, 10358

1 16

Page 7

Adjust the cutting height as desired. Set all four wheels to the same height.

m-6587

2 2-1/2

1-1/23

3-1/2

m-6589

Squeeze the bottom of the handle halves together (as shown) and change the handle holes in which the pins (A) are mounted, as follows:

•Raise the handle using hole (B).

•Lower the handle using hole (C).

Note: The cable guide is not shown for the purpose of clarity.

B C

m-5614

m-5612

3329-170

Image 7

Contents

General Operation SafetyIntroduction Silver SeriesDo not run the engine indoors or in an enclosed area ServiceChildren Slope Operation92-2914 43-8480 92-2915 65-2690 93-7250 99-6018 Safety/Instruction Decals100-6365 Model 10358 only 104-7953 Model 10357 only Product OverviewIf a cable is damaged, contact an Authorized Service Dealer SetupInstalling the Fuse Do not damage the cables when folding or unfolding the handleBefore Operating Charging the BatteryFill the tank outdoors when the engine is cold. Wipe up spills Do not handle gasoline when smoking or around an open flame or sparksAdjusting the Handle Height Adjusting the Cutting HeightFRONT Stopping the Engine Using the Self-propel DriveOperation Starting the EngineA C B Installing the Mulch PlateA C B Installing the Cover PlateInstalling/Removing the Rear Grass Bag Model 10358 onlyA C B Operating TipsCutting Grass D B A CMaintenance Procedure MaintenanceRecommended Maintenance Schedule Maintenance ServiceChanging the Engine Oil Preparing for MaintenanceReplacing the Air Filter Replacing the Fuse Wear cloth or leather gloves when servicing the bladewood, put your weight behind the ratchet or Replacing the BladePreparing the Mower for Storage Cleaning the MowerStorage Folding the HandleConditions and Products Covered The Lawn-Boy No-Worry WarrantyLimited Warranty for Commercial Use Instructions for Obtaining Warranty Service