Leica 6007282, 772789-R, 798056, 6007285, 762767-R Button Functions, Automatic / Manual modes

stable surface. For more stability, it is recommended to use the wall mount. Use the support plate {D-7}for stability when in vertical mode.

Turning on the laser

Turn on the laser with the On/Off key {B-3}. It does a self-test and the beam blinks while the laser is self- leveling. After it is leveled, the head rotates. You can choose H.I. Alert mode or change to manual mode (see later sections).

The laser has a wide self-leveling range; however, if the laser is set up out of the leveling range, the laser beam will continue to blink and the rotation will not start.

X-axis and Y-axis LED indicators

The X and Y-axis LED indicators {B-10}slowly blink green while the axes are leveling and turn on solid when each axis has reached a level position. They will rapidly blink red when in manual mode and the axis can be adjusted. They will be red and on solid when in manual, but the axis cannot be adjusted.

Button Functions

The CCW/CW and Plus/Minus buttons on the laser and the remote control units have multiple functions depending on the mode of operation. Please refer to the chart below to better understand their functionality.

Mode	CCW / CW Buttons	Plus / Minus
		Buttons
Automatic	Moves stationary	Changes head
mode - rotating	beam – CCW/CW	speed
Automatic	Moves scanning	Changes scan
mode - scan-	beam – CCW/CW	width
ning
Laydown mode	Moves vertical	Changes head
- rotating	plane – Left/Right	speed
Laydown mode	Moves scanning	Changes scan
- scanning	beam – CCW/CW	width
Manual mode -	Moves manual	Changes head
rotating	slope – Inclines	speed
	plane
Manual mode -	Moves scanning	Changes scan
scanning	beam – CCW/CW	width
Motor mount	No function	Moves the laser
mode		- Up/Down

These fully apply only on Roteo 35. Other models feature less functions, according the following sections.

Roteo 20HV/25H do not feature all buttons {B} as Roteo

35.Refer to RC350 section later to see how to use RC350 instead of the {B} buttons.

EN

Automatic / Manual modes

The Roteo is in automatic, self-leveling mode when turned on. Once the instrument has self-leveled, the

Roteo 20HV/25H/35/35G - 1.2.0en

4

Basic Operation