Leica EZ4 HD manual HD mode and PC mode, Optional remote control

HD mode and PC mode

The camera is normally in what is known as "HD mode" after being switched on. In this mode, it outputs a high-resolution signal in 16:9 wide- screen format. The images can then be saved directly to an SD card.

If the Leica EZ4 HD is connected to a computer via USB and the Leica software provided is star- ted, the camera switches automatically to what is called "PC mode". In this mode, images are transmitted to the computer with a size of up to 3 megapixels. The aspect ratio is always 4:3.

If the camera is in PC mode, images cannot be captured directly to an SD card.

All images are stored on the PC.

If the camera is in HD mode, it is not detected by the Leica software. All

images are stored on the SD card.

The microscope remains in the last selec- ted mode (HD or PC mode) until you change it. You can do this automatically by star- ting the Leica software or manually by pressing and holding the black multifunction button for

5 seconds.

Optional remote control

You can use the optional remote control only if the camera is HD mode – with the exception of the "i" button, which you can use to show various information on the monitor

even in PC mode.

Leica E Series Manual 42