Operation

RX1200

64

Increase radio coverage on Smart- Rover

Description

Some applications require the maximum radio coverage. In those cases the radio antenna is mounted on an antenna arm which is fixed to the pole just below the SmartAntenna. Connection is made between the radio housing and the radio antenna.

Connect radio antenna and radio housing using cable step-by-step

Step Description

1.Clip the antenna arm to the SmartAntenna.

2.Screw the radio antenna onto the antenna arm.

3.Attach the radio in its housing to GHT56.

4.Place the battery into the battery compartment of the GHT56.

5.Attach GHT56 to the pole and tighten the screw.

6.Connect the radio antenna to the radio housing using the 1.2 m antenna cable.

Page 64
Image 64
Leica RX1200 user manual Increase radio coverage on Smart- Rover Description