Leica Working in Semi-Transparent Mode, Operation RX1200 116, Set ComMode Semi-Transparent

Operation RX1200 116

4.11.3Working in Semi-Transparent Mode

Description

)

Access step-by-step

<ComMode: Semi-Transparent>enables the total remote control of TPS1200 in RCS mode but the data being captured by TPS1200 will be sent via radio link to the LEMO port of RX1200. A computer connected to this port will receive the data captured on TPS1200 in real-time.

Data being sent over the radio link in this mode is not protected by a Leica protocol. There exists a chance of data loss without notification.

Step Description

)From CONFIGURE Interfaces on TPS1200 ensure that GSI Output and RCS Mode are turned on.

) Proceed to the local menu of RX1200.
1.	Select RX1200:
	Main Configuration Menu: Radio/Comms Settings, Modes page.
2.	Set <ComMode: Semi-Transparent>.