Leica user manual Working in Transparent Mode, Set ComMode Transparent, Operation RX1200 115

4.11.2Working in Transparent Mode

Description

Access step-by-step

<ComMode: Transparent> enables the remote control of TPS1200 with GeoCOM commands. RX1220 becomes a transparent radio modem, like the RadioHandle or TCPS27B. GeoCOM commands can be sent from a computer to RX1220, which are then sent to TPS1200 via RadioHandle or TCPS27B. These commands will be executed on TPS1200 and results can be sent back.

Step Description

)From CONFIGURE Interfaces on TPS1200 ensure that GeoCOM Mode is turned on and RCS Mode is turned off.

) Proceed to the local menu of RX1200.
1.	Select RX1200:
	Main Configuration Menu: Radio/Comms Settings, Modes page.
2.	Set <ComMode: Transparent>.

Operation RX1200 115