Leica Operation RX1200 110, Connect to LGO via USB cable step-by-step Step Description

Operation RX1200 110

Connect to LGO via USB cable step-by-step

Step Description

1.Start the PC.

2.Plug the GEV161 cable into RX1250.

3.Turn the RX1250 on.

4.Plug the GEV161 cable into the USB port of the PC.

)ActiveSync starts up automatically.

If does not start automatically, start ActiveSync.

If not already installed, run the ActiveSync installation program.

5.Allow USB connections inside the Connection Settings window of ActiveSync.

6.Start LGO or install it if not available.

7.Start the Leica SmartRover software on the RX1250.

8.Goto Data Exchange Manager in LGO.

9.Click Refresh on the ActiveSync folder.

10.Establish the communication to RX1250.

)The folders CF-Card, System1200 and Sensor System are displayed in the Data Exchange Manager.