Electronic Appliances

Step 4. Dexen Electronic Valves - See Figure

20and the instructions provided with the kit. Remove and discard the two pressure regulator mounting screws. Remove the pressure regula- tor and diaphragm. Discard all removed compo- nents. Ensure the rubber gasket installed on the back of the replacement pressure regulator is properly positioned. Install the new pressure regulator using the new screws supplied with the kit. Tighten screws to 25 In. lb. torque.

Note: Natural gas regulators are identified with a blue dot. Propane regulators have a red dot.

Pilot Stage terminal

Ground (tP)

tP

Gas Outlet to Burner

Pressure-tap

Pilot Gas

(Inlet)

Outlet

IN

 

 

 

tH tP

 

 

 

LO HI

PILOt

 

Supply

tH

 

 

Gas

Out

 

IN

Inlet

 

 

VENt

 

 

 

Step 5. See Figure 21 and replace the pilot orifice as follows: Remove pilot hood assembly by grasping the hood and pulling the assembly straight up. Under the hood is the pilot orifice. With caution and using a magnetic screwdriver, undo the pilot orifice and remove it from the

Burner Stage

regulator

Pressure-tap

terminal

Mounting Screw

(Manifold)

Figure 20

assembly. Carefully replace the orifice with the one provided with the kit. Press the pilot hood back over the assembly. The orientation should be aligned as shown in Figure 21. Exercise extreme care to prevent damage to or break- age of the ignitor assembly.

Note: Propane pilot orifices are identified with a countersink in the head. Natural gas orifices do not have this countersink. See Figure 21.

Step 6. (Refer to Figure 19 on page 15 )

A. Remove the orifice from the manifold with a 1/2" deep throat socket. See the following table for orifice sizes for natural and propane models. Figure 22 illustrates the orifice. Use pipe joint compound or Teflon tape on all pipe fittings before installing (ensure propane resistant compounds are used in propane ap- plications, do not use pipe joint compounds on flare fittings).

B. Retrieve the burner and slide the venturi tube over the orifice. Secure the burner in place with the clip shown in Figure 19.

Step 7. Reassemble the remaining components by reversing the procedures outlined in the preceding steps.

ELECtrONIC PILOt

 

 

Pilot

Sensor

Hood

Ignitor

 

PrOPANE

NAturAL

Note: If the ignitor is damaged, a replace- ment kit is available, order Catalog Number 87L54.

Figure 21

Model No.

Orifice size

 

 

Natural

Propane

 

 

 

 

E36ODG

#28

#47

(0.1405)

(0.0785)

 

 

 

 

E42ODG

#28

#47

(0.1405)

(0.0785)

 

 

 

 

Figure 22

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.

Lennox Hearth Products reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and also to discontinue colors, styles and products. Consult your local distributor for fireplace code information.

Printed in U.S.A. © 2006 by Lennox Hearth Products

P/N 850,034M REV. D 04/2009

 

1110 West Taft Avenue • Orange, CA 92865

 

 

 

Page 15 Page 16
Page 16
Image 16
Lennox Hearth E42ODGNE-H, E36ODGNE, E36ODGPE-H Electronic Appliances, Refer to on, ELECtrONIC PILOt Pilot Sensor, Ignitor
Page 15 Page 16

E42ODGPE-H, E42ODGNE-H, E42ODGPE, E36ODGNE, E36ODGPE specifications

Lennox Hearth gas fireplaces are designed to offer both aesthetics and performance, making them a popular choice for homeowners seeking warmth and ambiance. The models E36ODGNE-H, E42ODGNE, E36ODGPE-H, E36ODGPE, and E36ODGNE stand out due to their innovative features and advanced technologies, ensuring efficiency while enhancing the overall look of any space.

One of the most significant features of these fireplaces is their impressive heating capacity. The E36ODGNE-H and E42ODGNE models provide substantial warmth, making them suitable for various room sizes. With a maximum BTU output reaching up to 40,000, they can effectively heat your living space while creating a comfortable environment. Additionally, the option for variable fan speed allows for consistent and efficient heat distribution, ensuring that every corner of the room remains cozy.

The design of Lennox Hearth fireplaces is both stylish and functional. The sleek glass doors provide a clear view of the flames, and the modern aesthetic can complement a variety of interior designs. With customizable finish options, homeowners can tailor their fireplace to match their decor, making it a focal point in their living space.

Another remarkable aspect of these models is their user-friendly control options. The integrated remote control allows for easy operation, letting users adjust flame height and fan speed with the push of a button. This convenience enhances the overall experience, allowing for seamless enjoyment of the fireplace.

Safety is also a priority in the design of Lennox Hearth fireplaces. These models come equipped with safety features such as an automatic shut-off system and a glass door that remains cool to the touch, ensuring that users can enjoy their fireplace without worry.

The efficiency of Lennox Hearth fireplaces is evident in their remarkable thermal efficiency ratings. These units are designed to maximize energy use, resulting in lower operating costs while still providing abundant warmth. This eco-friendly approach aligns with modern energy-saving standards, making these fireplaces an attractive choice for environmentally conscious consumers.

In summary, Lennox Hearth’s E36ODGNE-H, E42ODGNE, E36ODGPE-H, E36ODGPE, and E36ODGNE models present an intriguing combination of style, efficiency, and safety. Whether you are looking to enhance your home’s interior or seeking an effective heating solution, these fireplaces deliver the performance and elegance that discerning homeowners desire.
Top Page Image Contents