PLACING GLOWING EMBERS

Remove the door (refer to Figure 6 ) by grasping the door firmly at the bottom and supporting the top. Lift up and away.

Place the orange plastic glowing ember coals along the back of the ember bed, behind and below the logs. Refer to Figures 13 and 14.

Reinstall the door. Catch all four tabs in the slots located at the four corners of the unit inside of the outer frame. Ensure the slots on the tabs engage the face frame as the door drops into place downwards.

Figure 13

Figure 14

ACCESSORY PARTS AND COMPONENTS FOR THE MPE-27

The accessory parts and components listed on this page are to be used only with your MPE-27 electric fireplace. Separate installation instructions are packaged with all ac- cessories.

If you encounter any problems or have questions concerning the installation or application of this system, please contact your dis- tributor. For the name of your nearest distributor contact:

LENNOX HEARTH PRODUCTS

1110 West Taft Avenue

Orange, CA 92865

Model

Catalog Number

Weight

MPE-27

H3428

78 lbs.

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.

ACCESSORY COMPONENTS

The following items are available for use with this appliance.

Cabinet Surround Kit, Mantel

 

 

- Painted White

H3431

SK-27W

- Honey Oak

H3432

SK-27O

 

 

 

Touch-Up Paint Kit (Gray)

H5093

TPK-GR

Touch-Up Paint Kit

Repair of minor scratches and discoloration of the appliance's painted surfaces may be accomplished with the use of this touch-up paint kit.

9