Network
Enable Data Mode
Your phone may be able to receive certain data, depending on the system sending the information. You cannot receive voice calls while the phone is in data mode. To receive data, you must connect the phone to a laptop or PC and switch the phone from voice mode to data mode.
Note: To purchase a cable, visit
From Data Calls, select one of the following:
•Voice Only turns data mode off.
•Data, next call sets the phone to data mode for the next incoming call or the next ten minutes.
•Data, until off sets the phone to data mode until the phone is off.
Enable Privacy Alert
From Privacy Alert, select Enabled to set your phone to alert you when enhanced digital CDMA privacy is lost or regained.
Enable Voice Privacy
From Voice Privacy, select Enhanced to use enhanced digital CDMA privacy.
Enable Roaming Service Alert
Use this setting if you want the phone to alert you when you roam outside of your home service area.
From Roam/Svc Alert, select one of the following:
•Disabled turns roaming service alert off.
•When no svc alerts you with three tones decreasing in pitch when service is lost and three tones increasing in pitch when service is acquired again.
•On roam change alerts you with two decreasing tones when roaming service is acquired and three increasing tones when home area service is acquired again.
•On any change alerts you with three increasing tones if there is a change in roaming service or three decreasing tones if the phone loses service.
Set Roaming Restrictions
You can restrict your phone from making a call when roaming.
From Roam Option, select Automatic (to allow roaming) or No roaming (to disallow roaming).
User Guide | 41 |
