Lenovo 10AB000KUS Replacing the front audio and USB assembly, Installing the rear fan assembly

7. Pull on the tips of the rubber mounts until the rear fan assembly is secured in place.

Figure 65. Installing the rear fan assembly

8. Connect the rear fan assembly cable to the system fan connector on the system board.

What to do next:

•To work with another piece of hardware, go to the appropriate section.

•To complete the installation or replacement, go to “Completing the parts replacement” on page 99.

Replacing the front audio and USB assembly

Attention:

Do not open your computer or attempt any repair before reading and understanding the “Important safety information” on page v.

This section provides instructions on how to replace the front audio and USB assembly.

To replace the front audio and USB assembly, do the following:

1.Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect all power cords from electrical outlets and disconnect all cables that are connected to the computer.

2.Remove the computer cover. See “Removing the computer cover” on page 40.

3.Remove the front bezel. See “Removing and reinstalling the front bezel” on page 41.

Chapter 5. Installing or replacing hardware 79