Lenovo 10AB000KUS manual Installing or replacing a PCI card, What to do next

Models: 10AB000KUS

1 176
Download 176 pages 18.46 Kb
Page 54
Image 54

3.Remove the front bezel by releasing the three plastic tabs on the left side and pivoting the front bezel outward.

Figure 13. Removing the front bezel

4.To reinstall the front bezel, align the three plastic tabs on the right side of the front bezel with the corresponding holes in the chassis. Then, pivot the front bezel inwards until it snaps into position on the left side.

What to do next:

To work with another piece of hardware, go to the appropriate section.

To complete the installation or replacement, go to “Completing the parts replacement” on page 99.

Installing or replacing a PCI card

Attention:

Do not open your computer or attempt any repair before reading and understanding the “Important safety information” on page v.

This section provides instructions on how to install or replace a PCI card. Your computer has various PCI card slots. For more information, see “Features” on page 1.

To install or replace a PCI card, do the following:

1.Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect all power cords from electrical outlets and disconnect all cables that are connected to the computer.

2.Remove the computer cover. See “Removing the computer cover” on page 40.

42ThinkCentre M83, M93/p User Guide

Page 54
Image 54
Lenovo 10AB000KUS manual Installing or replacing a PCI card, What to do next