1040 DIMM
For access, remove these FRUs in order:
v“1010 Battery pack” on page 71
v“1020 Bottom door” on page 73
Table11. Removal steps of DIMM
Note: Loosen the screws 1, but do not remove them.
11
2
a
b
Note: If only one DIMM is used on the computer you are servicing, the card
must be installed in SLOT-0 (a), but not in SLOT-1(b).
When installing: Insert the notched end of the DIMM into the socket. Press the
DIMM firmly,and pivot it until it snaps into the place. Make sure that it is
firmly fixed in the slot and does not move easily.
76 ThinkPad X100e HardwareMaintenance Manual